Beetle L4-1.9L DSL Turbo (ALH) (1998)
Air Door Cable: Adjustments
Heating and Ventilation Cables, Installing and Adjusting
NOTE:
-
Cable sleeve ends are color coded.
-
Check cables before installing. Replace binding or damaged cables.
-
Attach cables to removed controls first and then attach to levers at heating and ventilation unit.
-
All air flaps must audibly move onto end stops when turning controls.
1
-
Central flap cable
-
From air distribution rotary control to central flap
-
Cable sleeve marking: Yellow
-
Installing and adjusting, refer Fig. 3
2
-
Footwell/defrost flap cable
-
From air distribution rotary control to footwell/defrost flap
-
Cable sleeve marking: Green
-
Removing:
-
Remove heating and ventilation controls.
-
Unclip cable from controls
-
Remove steering column trim.
-
Unclip cable at heating and ventilation unit.
-
Installing and adjusting, refer Fig. 2