Beetle L4-1.9L DSL Turbo (ALH) (1998)
Compressor Clutch: Service and Repair
A/C Clutch - N25-, Servicing (Sanden)
NOTE:
-
Refrigerant circuit does not need to be discharged to service A/C clutch.
-
If A/C clutch is to be serviced with compressor installed, first do the following:
-
Remove ribbed belt
-
Remove intercooler (engine code ALH only)
-
If A/C clutch is to be serviced with compressor removed, first do the following:
-
Discharge refrigerant system.
-
A/C clutch, removing and installing.
-
A/C refrigerant system, servicing.
1
-
Hex nut
-
Self- locking
-
Always replace
-
15 Nm (11 ft. lb)
-
Removing and installing
2
-
Clutch plate
-
Removing See: A/C Clutch -N25-, Removing and Installing
-
Checking clutch plate gap See: A/C Clutch -N25-, Removing and Installing