Beetle L4-1.9L DSL Turbo (ALH) (1998)
Control Assembly: Service and Repair
Heating and A/C Controls/Mechanical Components, Servicing
Components in passenger compartment, servicing
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, recode and check operation of anti-theft radio. Also check operation of clock and power windows.
-
Immediately plug open connections on A/C components to prevent dirt and moisture contamination.
NOTE:
-
Before carrying out any work on the A/C refrigerant system. Refer to "A/C Refrigerant System, Safety Measures" See: Service
Precautions/Technician Safety Information
-
System components identified with an * must only be serviced or replaced after discharging refrigerant system. Use Kent Moore ACR4 or
equivalent.
1
-
Heating and A/C controls
-
With A/C switch -E35-
-
With fresh air blower switch -E9-
-
With switch for fresh air blower and recirculated air -E184-
-
Removing and installing
-
Assembly
2
-
Dust and pollen filter
-
Removing and installing