Beetle L4-1.9L DSL Turbo (ALH) (1998)
Installing
CAUTION!
The physical and mechanical properties of HID bulbs are very sensitive Always use care when handling HID bulbs.
-
Insert new bulb, making sure that the bulb mounting aligns with the locating lugs in the housing.
-
Position retaining ring -1- recesses - arrows- over locking tabs -2- of HID bulb -3- and secure by turning clockwise.
-
Reinstall headlight housing.
-
Check headlight (HID lamp) function.
-
Check headlight aim
High beam bulb, replacing
CAUTION!
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on
the bulb during operation can cause the glass to cloud over.
Removing
-
Remove headlight housing.
-
Remove sealing cap.
-
Turn lever -1- on bulb mounting to left -arrow- to release.
-
Pull main beam bulb with mounting out from reflector.
Installing
Installation in reverse sequence of removal.
-
Check headlight (high beam bulb) function.