Beetle L4-1.9L DSL Turbo (ALH) (1998)
License Plate Bulb: Service and Repair
License plate light bulb, replacing
Removing
-
Remove license plate light.
-
Turn bulb holder in direction shown (arrow) and remove from housing.
-
Pull out bulb (12V/5W), do not turn.
Installing
CAUTION!
Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation, can cause the glass to cloud over.
-
Install in reverse order.
-
When installing, make sure bulb holder engages in housing by turning in opposite direction shown (arrow).