Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-374001.png)
Brake Bleeding: Service and Repair
Without Pressure Bleeder
Brake System, Bleeding Without Pressure Bleeder
-
Connect hose from bleeder bottle to brake at each wheel using sequence from Service and Repair; Using US 1116 Pressure Bleeder.
-
Pump brake pedal several times and then hold pedal down.
-
0pen bleeder screw.
-
Close bleeder screw.
Caution!
^
The brake fluid level in the reservoir must not fall between the MIN mark during bleeding.
-
Release brake pedal.
-
Repeat operation until brake fluid flows without air bubbles.
