Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Install 10-222A support with 10-222A/1 legs as shown.
-
Remove engine mount -1-as follows:
-
Unscrew bolts -arrows-
-
Remove vibration damper/belt pulley.
-
Install toothed belt guard center and lower sections.
-
Mark engine direction of rotation on the toothed belt.
-
Remove toothed belt.
Toothed Belts, installing
-
Ensure that TDC mark on flywheel and reference mark are aligned.
-
Loosen camshaft sprocket mounting bolt 1/2 turn.
-
Place a drift through hole in rear of toothed belt guard and release the camshaft sprocket from camshaft taper with a light and careful hammer
blow.
-
Install toothed belts note engine direction of rotation) on crankshaft toothed belt sprocket, intermediate wheel, injection pump sprocket and
tensioning roller.
-
Install camshaft sprocket together with toothed belt and position using mounting bolt.
-
Camshaft sprocket should still turn