Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Check wiring for open circuit between Test Box and harness connector using Wiring diagram.
Up to MY 1999
-
Terminal 1 + socket 2
-
Terminal 1 + socket 28
-
Terminal 2 + socket 46
From MY 2000
-
Terminal 1 + socket 1
-
Terminal 1 + socket 2
-
Terminal 2 + socket 66
Wire resistance: 1.5 Ohms maximum
-
Check wires for shorting to: one another, Ground and Battery +
Specification: Infinity Ohms
If wiring OK
-
Replace Engine Control Module -J248-
-
Display the Readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If DTC memory was erased
-
Set the Readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes