Beetle L4-1.9L DSL Turbo (ALH) (1998)
Relay must click.
If relay does not click:
-
Check relay for preheating coolant, high heat output -J360-.
Activating Malfunction Indicator Lamp (MIL) and Switch -K82-:
- Press -> button.
Indicated on display:
Output Diagnostic Test Mode
->
Malfunction Indicator Lamp (MIL)
MIL must flash.
MIL does not flash:
-
Check Malfunction Indicator Lamp (MIL) and Switch -K82-:
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -6- for "End output" and confirm with -Q- button.
-
Switch off ignition.