volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Customer Interest for Throttle Position Sensor: > < A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set|Page 3907

Beetle L4-1.9L DSL Turbo (ALH) (1998)

Page 7
background image

-

Twist stripped end of resistor wire with end of (gray/green) wire coming from harness, install butt-splice and crimp as shown.

-

Crimp remaining end of gray/green wire (from TCM connector end into other end of butt-splice as shown).

-

Re-tape wiring harness.

-

Reinstall TCM connector cover and install new tie-wrap.

-

Reinstall connector onto TCM.

-

Verify throttle angle setting using Function 08 display group 001-->(IMPORTANT! kickdown switch activation must be verified during throttle
angle setting).

Customer Interest for Throttle Position Sensor: > < A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set|Page 3907