Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-872002.png)
-
Measure resistance between connector terminals 2 + 3.
-
Specification: 12 to 20 Ohms
If specification not obtained
-
Replace Cold Start injector N108.
-
Display the Readiness code. See: Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If DTC memory was erased
-
Set the Readiness code. See: Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If specification obtained
-
Connect VAG 1598/22 (or 1598/31) Test Box to ECM wiring harness.
