volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set|Page 4519 > < A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set|Page 4517

Beetle L4-1.9L DSL Turbo (ALH) (1998)

Page 4
background image

DO NOT perform procedure if the electrical connector receptacle is made of aluminum.

DO NOT perform procedure if EPROM level of Digimat 2.1 TCM is above 4066.

Resistor wire, installing

-

Disconnect 68 pin connector from TCM.

-

Out tie wrap at end of connector and remove cover from connector by depressing tab with small screwdriver while pushing cover in direction of
-arrow-.

-

Locate cavity 50 of TCM connector -arrow- (cavity should be empty).

CAUTION!

Part numbers are for reference only. Always check with your Parts Dept. for the latest parts information.

A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set|Page 4519 > < A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set|Page 4517