Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-633005.png)
-
Install electrical connector of resistor wire Part No. ZVW 311 100 into this cavity (50).
-
Remove enough tape to expose 125 mm (approx. 5 in.) wire harness.
-
Locate gray/green wire in cavity 16 of TCM connector -arrow-.
-
Follow wire from cavity 16 back into harness approx. 100 mm (4 in.), cut wire at this location.
-
Strip insulation from both ends of wire.
