Beetle L4-1.9L DSL Turbo (ALH) (1998)
Fuel Temperature Sensor: Testing and Inspection
With Manufacturer's Scan Tool
Fuel Temperature Sensor -G81-, Checking
Special tools
-
VAG 1551/1552 Scan Tool using VAG 1551/3 Adapter cable
-
VAG 1598/22 Test Box (MY 1999)
-
VAG 1598/31 Test Box (from MY 2000)
-
Fluke 83 multimeter
-
VW 1594 Adapter kit
-
Wiring diagram
Test sequence
-
Connect VAG 1551/1552 Scan Tool.
-
Start engine and let idle.
-
Press 0 and 1 buttons to select Address word 01: "Engine electronics"
Display will appear as shown (example only)
038906018M 1.9l R4 EDC 00AG 1813
->
Coding 0001
WSC XXXXX
-
Press -> button.
Display will appear as shown
Rapid data transfer
HELP
Select function XX
-
Press 0 and 8 buttons to select Function 08: "Read measuring value block".
-
Press Q button to enter input.
Display will appear as shown
Read measuring value block
HELP
Input Display group number XXX
-
Press buttons 0, 0 and 7 to select "Display group 7".
-
Press Q button to enter input.
Read measuring value block 7
15.4 °C 15.9 °C 16.7 °C
Display will appear as shown
If an unrealistic value appears in Display zone 1 or a substitute temperature of -5.4 °C is displayed
-
Check Fuel Temperature Sensor -G81-and wiring to sensor as follows:
-
Press -> button.
Display will appear as shown
Read measuring value block
HELP
Input Display group number XXX
-
Press 0 and 6 buttons to select Function 06: "End output".
-
Switch OFF ignition.