Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Disconnect -G72- harness connector:
Component locations overview.
-
Measure resistance between sensor terminals 1 + 2.
Specification chart
Scale A shows resistance values for temperature range 0 to 50 °C and scale B the values for temperature range 50 to 100 °C.
Examples:
-
30 °C corresponds to a resistance from 1500 to 2000 Ohms
-
80 °C corresponds to a resistance from 275 to 375 Ohms
If specification not obtained
-
Replace Intake Air Temperature (IAT) Sensor -G72-.
-
Display the Readiness code See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles
and Readiness Codes
If DTC memory was erased
-
Set the Readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and
Readiness Codes
If specification obtained