Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Release lock cylinder securing lever using wire -2- and remove lock cylinder from steering lock housing.
1
-
Lock cylinder
2
-
Wire (approx. 1.2 mm diameter)
3
-
Securing lever
Installing
-
Insert ignition key into lock cylinder.
-
Turn to "Drive" position.
-
Release securing lever using wire (approx. 1.2 mm diameter) and insert lock cylinder in steering lock housing.
-
Remove wire out from lock cylinder and check that lock cylinder is seated properly in steering lock housing.
-
Install steering column switches and steering wheel trim.