Beetle L4-1.9L DSL Turbo (ALH) (1998)
Information
Work Procedure
Work Procedure
-
Open hood and check for yellow dot on battery tray next to battery hold down plate (arrow)
-
If yellow dot is present, NO OTHER WORK IS REQUIRED
-
If yellow dot is not present, proceed as follows:
-
Switch ignition off, open battery cover and disconnect battery ground (GND) cable from the negative (-) battery terminal then the power cable
from the positive (+) terminal of the battery
HINT: Use tape to hold battery cover in the open position
-
Remove bolt -A- holding power steering fluid reservoir in position, and remove bolt -B- holding battery side cover
-
Carefully unsnap both ends of battery side cover from battery tray and remove side cover. If side cover is damaged, replace (P/N 1C0 937