Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1309001.png)
Fuse Block: Service and Repair
Fuse panel and relay panel, removing and installing
CAUTION!
Before working on the electrical system:
-
Determine the correct coding for the antitheft radio.
-
Switch ignition off
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of the anti-theft radio.
Fuse panel, removing and installing
Removing
-
Remove driver's side dash panel trim.
-
Carefully pry on fuse panel cover from instrument panel.
-
Remove both securing screws -1- and remove fuse panel -2- inward.
Installing
-
Install in reverse order.
