volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Recall - Battery Tray/Engine Wiring Harness|Page 6245 > < Recall - Battery Tray/Engine Wiring Harness|Page 6243
Page 3
background image

589B)

-

Remove bolt and battery clamp (arrow), then remove battery and battery blanket together

-

Open fuse cover panel on battery, unsnap and remove wire cover -C-

-

Remove (2) bolts -D- between air cleaner and battery and remove plastic wire guide

-

Remove (6) bolts -E- from battery tray, push out plastic wire holder -F-

Properly tag removed battery trays and hold pending further instruction.

-

Review condition of all wire harnesses underneath or near battery tray
-

Wires that exhibit chafed insulation must be repaired as follows:
-

Insulation chafed with NO copper wire exposed: wrap wire with electrical tape

-

Insulation chafed - copper wire exposed: use VAS 1978 wiring repair kit

-

Loosen tie wrap (arrow) around wire harnesses

Recall - Battery Tray/Engine Wiring Harness|Page 6245 > < Recall - Battery Tray/Engine Wiring Harness|Page 6243