Beetle L4-1.9L DSL Turbo (ALH) (1998)
1. Self-locking nut
-
Always replace
-
60 Nm (44 ft. lbs.)
2. Stop
3. Suspension strut turret
4. Hex nut
-
60 Nm (44 ft. lbs.)
5. Suspension strut mount
6. Axial ball bearing
7. Bushing
-
Not applicable for US/Canada
8. Spring plate
9. Coil spring
-
Observe color coding
-
Outer surface of spring must not be damaged
10. Self-locking nut
-
Always replace
-
50 Nm + 1/4-turn (90°)
-
Never less than 90°!
-
Turning angle tolerance 90° - 120°
11. Wheel bearing housing
12. Hex bolt
-
Always replace
13. Shock absorber
-
Can be replaced individually
14. Buffer stop
15. Protective sleeve
Suspension Strut Removal and Installation
Suspension Strut, Removing and Installing
Removing
-
Raise vehicle.
-
Remove wheel.