Beetle L4-1.9L DSL Turbo (ALH) (1998)
1. Gas-filled shock absorber
-
Can be replaced individually
-
Determine part number from parts catalog microfiche
Checking function:
-
Compress shock absorber by hand. Piston rod must move over its complete length smoothly and with even force
-
If gas pressure is sufficient, piston rod returns to its original starting position
-
If piston rod does not return to its original starting position and there is no loss of oil then shock absorber is still OK
2. Protective cap
3. Protective tube
4. Stop buffer
5. Shock absorber mount
6. Self-locking hex nut
-
Always replace
-
25 Nm (18 ft. lbs.)
-
Removing refer to Fig. 1
7. Cover
Fig. 1 Removing hex nut from shock absorber
1. Commercially available ratchet handle
2. T10001/9 Socket
3. T10001/11
4. T10001/1 Socket