Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1020003.png)
^
Measure with depth gauge -B- to pump flange on transmission housing.
^
measured distance from pump flange/transmission housing into -K1-.
Calculating "b":
^
Place new paper gasket on ATF pump.
^
Place straight edge -B- on stator support -arrow- and measure with depth gauge -A- to gasket of pump flange.
Example:
Reading = 70.5 mm
Straight Edge = -19.5 mm
Calculated Size b = 51.0 mm
Gap X = a - b
= 54.2 mm - 51.0 mm = 51.0
Determine size of shim according to table:
Table of shims:
^
Be sure thickness of shims is according to the table. Determine Part No. from parts catalog.
^
Check clutch play measurement after installing ATF pump.
Clutch play measurement, checking
^
The clutch play cannot be measured until the ATF pump has been installed.
^
Attach dial gauge holder to transmission housing and place dial gauge on turbine shaft with a preload of 1 mm. Move turbine shaft up and down
and read play on dial gauge.
Play:
