Beetle L4-1.9L DSL Turbo (ALH) (1998)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal, Removing and Installing
5 Speed Manual 02J
Clutch Pedal, Removing and Installing
Special tools
-
3309 Release tool
-
10-208 A Pliers
Removing
- Remove over-center spring.
- Remove clutch pedal switch, if part of orignal equipment.
- Separate clutch pedal from master cylinder and push operating rod toward engine compartment until stop.
- Remove nut -A-.
- Pull bolt out until clutch pedal can be removed.
Installing
Install the clutch pedal in the reverse order of removal and note the following:
- Install over-center spring.