Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Set dial indicator to "0" with 1.0 mm preload.
Note:
This preparation is to be repeated for each measurement, otherwise the dial indicator will not return to the starting position.
-
Press input shaft in direction of dial indicator (-arrow)
-
Read and record clearance indicated (example: 1.2 1).
Note:
The dial indicator does not return to the original position.
-
Determine thickness of shim from table (example 1.175 mm).
-
Remove input shaft and press tapered roller bearing outer race out of transmission housing using VW 447i.
-
Press tapered roller bearing outer race together with shim (size determined using table), into transmission housing.
-
Assemble transmission housing.
Tightening torque: 25 Nm (18 ft. lbs.) + 90°
Table of adjustment shims