Beetle L4-1.9L DSL Turbo (ALH) (1998)
Fig. 11 Pressing in tapered roller bearing outer race
Install with shim after adjusting input shaft.
Fig. 12 5th gear synchronizer
1
Springs for locking pieces
2
Operating sleeve with 3 recesses (arrows -A-) for locking pieces (item 4)
3
Synchronizer hub
4
Locking pieces installation position: thin extension (arrow -B-) faces pointed teeth of operating sleeve (item 2)
Fig. 13 Assembling 5th gear operating sleeve / synchronizer hub
-
Push operating sleeve over synchronizer hub.
-
Pointed teeth -A- of operating sleeve and shoulder -B- of synchronizer hub face in same direction.
-
Recesses for locking pieces in operating sleeve and synchronizer hub must be aligned (Fig. 12).
-
Insert locking pieces (Installation position: Fig. 12).
-
Insert springs offset by 120° underneath lug -C-.