Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-2082002.png)
-
Secure one cord end to spooling tool V.A.G 1654.
-
In place of spooling tool V.A.G 1654, the spooling tool V.A.G 1654 A can also be used.
-
As shown in illustration, one suction cup can be removed from spooling tool. By doing this, the roller of the spooling tool in the radii can be
placed closer to window flange.
-
Pull through second cord inward and attach grip from V.A.G 1351 to counterhold.
-
Set spooling tool V.A.G 1654 into "Position I".
-
Move spooling tool according to position required and cut windshield free.
-
While cutting free, press cutting cord in direction of window using plastic wedge or awl (from V.A.G 1474 ) in order to have clearance at window
flange.
-
While cutting, cutting cord is pulled into window flange at sides and upper edge of window. If necessary, cutting cord must be guided or seating
between lid and window must be corrected (wear leather gloves.).
