Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Tighten combi-nuts (20 Nm) through assembly opening -arrow-.
Adjusting side inclination (distance)
NOTE: The side window must be installed.
-
Remove window slot inner seal.
-
Remove bolts/screws -1-.
-
Lower door window to approx. central position until the combi-nut is visible in the assembly opening -arrow-.
-
Tighten combi-nut.
Then perform functional check.
Adjusting side inclination (distance)
NOTE: The side window must be installed.
-
Remove window slot outer seal.