Beetle L4-1.9L DSL Turbo (ALH) (1998)
Wiper Arm: Service and Repair
Wiper arms, removing
NOTE:
-
The wiper arm and cowl panel must be removed to remove the wiper frame with rods and wiper motor.
-
Before removing the wiper arms, make sure the wiper motor is in park position. Only then can wiper arm end position be correctly set when
re-installing.
-
Pry off black cover caps (arrows) using screwdriver.
-
Loosen hex nuts M8 (arrows), but do not remove completely.
-
Move wiper arms lightly until they release.
-
Remove hex nuts completely and remove wiper arms.