Beetle L4-1.9L DSL Turbo (ALH) (1998)
Wiper Blade: Service and Repair
Wiper rubber, removing and installing
Removing
-
Using pair of pliers press together both steel strips on the enclosed side of rubber.
-
Slide sideways out of upper clip and remove rubber complete with strips from other clips of wiper blades.
Installing
-
Slide new rubber into lower clips of wiper blade.
-
Insert both strips in first groove of rubber, so recesses in strips face rubber and engage in rubber lugs of groove.
-
Using pliers press both steel strips and rubber together, insert in upper clips so lugs of clips on both sides engage in retaining slots (arrow) of wiper
blade rubber.