Beetle L4-2.0L (AEG) (2000)
Muffler: Service and Repair
Muffler system with mountings, component overview
1. From Catalyst
2. Double clamp
^
Note installation position, Refer to Fig. 2
3. 25 Nm (18 ft. lbs.)
4. Mounting
^
Note installation position
5. Center muffler
^
Aligning, Refer to Fig. 4
6. Separation point
^
For repairing
^
Exhaust pipe is marked with three indentations around circumference
^
Center and rear mufflers are installed as a single welded component in production. Center and rear mufflers can be obtained individually with
double clamp as spare parts.
^
Saw through connecting pipe (at right angles) at separating point using body saw
7. Mounting
8. Bracket
9. Rear muffler
10. Mounting
^
With retaining ring
11. 20 Nm (15 ft. lbs.)
12. Tunnel bridge
13. 40 Nm (30 ft. lbs.)
14. Washer