Beetle L4-2.0L (AEG) (2000)
Control Assembly: Service and Repair
Heating and A/C Controls, Removing and Installing
Removing
-
Remove center air outlet console. Refer to "Air Outlets, Removing" See: Air Register/Service and Repair
-
Remove mounting screws -arrows-.
-
Lift out controls with cables from instrument panel in direction of -arrow A-.
-
Detach cables from controls.
-
Disconnect electrical connector.
With controls removed, check function of heating and ventilation cables as follows:
-
Move cables in and out several times -arrow-.
-
Replace damaged or stiff cables.
Installing
NOTE:
-
Cable sleeves are color coded.
-
All flaps must audibly move onto stops when turning controls.
-
Always check cables before installing. Replace tight or damaged cables.