Beetle L4-2.0L (AEG) (2000)
Cable sleeve marking: Yellow
Prerequisites:
-
Central flap lever correctly adjusted. Refer Fig. 1 in "Heating and Ventilation Unit, Assembly" See: Service and Repair
-
Heating and A/C controls are installed.
-
Connecting duct removed. See: Air Duct/Service and Repair
Adjusting
-
Turn air distribution rotary control knob to left onto stop.
-
Attach center wire of cable -2- to the central flap lever -1 -
-
Press footwell/defrost flap lever onto stop arrow -A- and attach outer cable -2- with clip -3-.
-
Turn air distribution rotary control knob to left and right onto stops.
When turning the rotary control knob both end stops must be reached.