Beetle L4-2.0L (AEG) (2000)
Backup Light Bulb: Service and Repair
Back-up light bulb, replacing
Removing
-
Remove back-up light.
-
Turn bulb holder in direction shown (arrow) and pull out from housing.
-
Remove bulb from holder.
Installing
CAUTION!
Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation can cause the glass to cloud over.
Install in reverse order.
NOTE: When installing, make sure bulb holder engages in housing by turning in opposite direction shown (arrow).