Beetle L4-2.0L (AEG) (2000)
Brake Light Switch: Adjustments
Brake Light Switch, Adjusting
Note:
Remove brake light switch to adjust.
-
Remove driver's side storage compartment.
-
Pull harness connector off brake light switch.
-
Remove brake light switch by turning 90° clockwise.
-
Pull brake light switch plunger fully out.
-
Press brake pedal down as far as possible by hand.
-
Guide brake light switch through assembly opening and reinstall by turning 90° to left.
-
Release brake pedal.
-
Install brake light switch harness connector.
-
Reinstall driver's side storage tray.
-
Operate brake pedal.
Both brake lights light up.
-
Take foot off brake pedal.
Both brake lights must not light up.