Beetle L4-2.0L (AEG) (2000)
^
Measure torque angle with torque angle wrench, i e. Hazet 6690
14. Gasket
^
Always replace
^
Fit into groove on oil cooler
15. Oil cooler
^
Coat mounting surface of oil filter flange outside seal with sealant AMV 188 100 02
^
Allow clearance for surrounding objects
^
See note, Refer to Engine Lubrication, Service and Repair, See Note
16. 25 Nm (18 ft. lbs.)
17. Oil filter
^
Loosen with strap wrench
^
Hand tighten
^
Observe installation instructions on oil filter
^
See note, Refer to Engine Lubrication, Service and Repair, See Note