Beetle L4-2.0L (AEG) (2000)
NOTE: The increased engine speed at idle is obtained via terminal 10 of the ECM which receives a Battery + signal from terminal 15.
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Take road test and repeat check.
Observe appropriate safety precautions during road test.
-
Display the Readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles
and Readiness Codes
-
If DTC memory was erased or if the ECM was disconnected from Battery + , set the Readiness code. See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes