Beetle L4-2.0L (AEG) (2000)
Indicated on display (1 to 4 = Display fields)
Read measuring value block 5
->
1
2
3
4
-
Check Closed Throttle Position switch (Display field 4).
If specification obtained
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
Check continuation when display shows Partial Throttle Position
-
Disconnect harness connector -1- from Throttle Control Module -2-.
-
Bridge connector terminals 2 + 6 using jumper wires from VW 1594 adaptor kit and observe display.