Beetle L4-2.0L (AEG) (2000)
When display shows Closed Throttle Position:
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Replace Throttle Control Module J338.
-
Match Engine Control Module to Throttle Control Module.
When display shows Partial Throttle Position:
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Check Voltage supply of Throttle Control Module and wiring to Control Module.
If Voltage supply and wiring OK:
-
Replace Engine Control Module.
Check continuation when display constantly shows Closed Throttle Position
-
Detach connector -1- from Throttle Control Module -2-.
When display shows Partial Throttle Position:
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Replace Throttle Control Module J338.
-
Match Engine Control Module to Throttle Control Module.