Beetle L4-2.0L (AEG) (2000)
If specified values attained:
-
Press the -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select Function 06: "End output"
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Display the Readiness code. Refer to "Monitors, Trips and/or Drive Cycle (Readiness Codes)/Displaying Readiness Code", See: Testing and
Inspection
If DTC memory was erased or if ECM was disconnected from Battery + , set the Readiness code. Refer to "Monitors, Trips and/or Drive Cycle
(Readiness Codes)/Setting Readiness Code", See: Testing and Inspection
Significance of figures in 4 digit number block in Display field 4, Display group 56