Beetle L4-2.0L (AEG) (2000)
Intake Air Plenum: Service and Repair
1
-
Retaining clip
-
Ensure it is securely seated
2
-
Strainer
3
-
Fuel pressure regulator
-
Fuel pressure regulator and residual pressure, checking See 'Fuel Pressure Regulator, Testing and Inspection, Procedures.' See: Fuel
Pressure Regulator/Testing and Inspection
4
-
O-ring
-
Replace if damaged
5
-
Fuel injectors */** N30 to N33
-
Checking See 'Fuel Delivery and Air Induction, Fuel Injectors, Testing and Inspection, Procedures.' See: Fuel Injector/Testing and
Inspection
6
-
Fuel rail, lower section
7
-
10 Nm (7 ft lb)
8
-
Fuel rail
Fig. 1 Resistance values
NOTE: The chart applies to Engine Coolant Temperature sensor G62 and Intake Air Temperature sensor G42.
The chart is divided into two temperature ranges:
A - from 0 to 50 °C