Beetle L4-2.0L (AEG) (2000)
Throttle Cable/Linkage: Adjustments
Throttle cable, adjusting
(Only engine code AEG)
Vehicles with manual transmission
Special tools and equipment
^
VAG1788/10 Throttle pedal depressor
Work procedure
-
Hook throttle cable to throttle pedal and quadrant on Throttle Control Module.
-
Remove retaining clip for throttle cable core.
-
Depress throttle pedal to Wide Open Throttle position.
Note: This step requires a second technician or a pedal depressor.
-
Adjust throttle cable by moving the retainer at support bracket, so that Wide Open Throttle position is obtained at Throttle Control Module.
-
Check Closed Throttle and Wide Open Throttle Position stops on Throttle Body after adjusting.
Vehicles with automatic transmission