Beetle L4-2.0L (AEG) (2000)
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Replace Mass Air Flow sensor G70.
When display is approx. -46 °C:
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Check wiring using Wiring diagram
Check continuation when display = approx. 141 °C
-
Disconnect 5-pin harness connector -1- from Mass Air Flow sensor -2-.
When display is approx. -46 °C
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.
-
Press Q button to enter input.
-
Switch OFF ignition.
-
Replace Mass Air Flow sensor G70.
When display is approx. 141 °C:
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 6 buttons to select "End output" function 06.