Beetle L4-2.0L (AEG) (2000)
Clutch Switch: Testing and Inspection
Clutch Pedal Switch Signal, Checking
Clutch Pedal Switch Signal, Checking
Special tools, workshop equipment, testers, measuring instruments and auxiliary items required
-
VAG 1551/1552 Scan Tool using VAG 1551/3 Adaptor cable
Test sequence
-
Connect VAG 1551/1552 Scan Tool. Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks", See: Powertrain
Management/Computers and Control Systems/Testing and Inspection
-
Start engine and let idle
-
Press 0 and 1 buttons to select "Engine Electronics" address word 01.
Indicated on display (example only)
06A906018AB Motronic M5.9.2 HS V06 ->
Coding 00000
WSC 00000
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press 0 and 8 buttons to select "Read Measuring Value Block" function 08.
-
Press Q button to enter input.
Indicated on display
Read measuring value block
HELP
Input display group number XXX
-
Press 0, 6 and 6 buttons to select "Display group 66"
-
Press Q button to enter input.
Indicated on display
Read measuring value block 66
->
1
2
3
4
-
Observe values in Display field 2 (4th digit to the left).
-
Specification: x 1 x x
-
Fully depress clutch pedal and observe value in Display field 2
-
Specification: x 0 x x
-
Press -> button.