Beetle L4-2.0L (AEG) (2000)
-
Disconnect harness connector - 3 - and remove bolts - 2 - (6 Nm).
Installing
CAUTION:
-
Make sure no one is in the vehicle.
-
Never let anyone sit in the passenger compartment when the airbag system is being worked on, especially when the airbag system is being
connected to a power source or the battery is being reconnected.
-
Close doors.
-
Connect battery ground (GND) strap
-
Switch ignition on after installing all components.
NOTE: After connecting battery, vehicle options (radio, clock, electric window regulator) must be checked according to repair manual and/or
user manual.