Beetle L4-2.0L (AEG) (2000)
Transmission Temperature Sensor/Switch: Service and Repair
Removing and installing conductor strip
The conductor strip can be replaced with the transmission installed and without removing the valve body.
Note:
Do not kink or damage the conductor strip.
^
Separate connector at transmission and remove retaining clamp.
^
Drain ATF
^
Remove transmission oil pan and remove wiring guide.
^
Pry conductor strip off solenoid valve in direction of arrow with special tool 3373.
Note:
^
If the locating points are damaged the valve body must be replaced.
^
Installation is performed in the reverse order.
^
Do not kink or damage the conductor strip.