Cabrio GL L4-2.0L (ABA) (2001)
Trim Panel: Service and Repair
B-Pillar Trim
B-pillar Trim, Removing And Installing
Removing
-
Remove side trim.
-
Unclip cap - 1 -, remove bolt - 2 - (40 Nm) and remove guide stop - 3 -
-
Unclip cover cap - 1 -, remove screw - 2 - and remove coat hook - 3 -.
Tightening torque bolt - 2 -: 40 Nm
-
Remove screws - 4 - and - 5 - and remove B-pillar trim.
Installing
-
Installation is reverse order of removal.