Cabrio GL L4-2.0L (ABA) (2001)
/Page-1244002.png)
-
Install brake pads.
-
Pull protective foil off outer brake pad backing plate.
NOTE:
Mount tool 3272 so that the tool collar (left arrow) is seated against caliper.
If the piston is difficult to move, use a 13 mm open-end wrench on tool flats (arrow -A-).
CAUTION: If the piston is pushed back with a piston resetting tool or by operating the brake pedal, the automatic adjustment mechanism in
the brake caliper will be destroyed
-
Install brake caliper with new self-locking bolts.
-
Connect parking brake cable to brake caliper.
-
Depress brake pedal firmly several times, with vehicle stationary, to seat brake pads in their normal operating position.
-
Check brake fluid level in reservoir and add fluid as necessary.
-
The illustration shows a brake caliper for a vehicle from 10.92 (the assembly sequence is the same)
