Cabrio GL L4-2.0L (ABA) (2001)
Oil Pan: Service and Repair
NOTE: During removal and installation procedures, refer to the component location illustration and component notes.
Lubrication system, components
9- 20 Nm (15ft lb)
16- Oil pump cover with pressure relief valve
‹› Opening pressure: 5.7-6.7 bar (82.5-97 psi)
17- 10 Nm (7 ft lb)
18- 20 Nm (15 ft lb)
‹› Loosen or tighten bolts on flywheel side with tool 3185
19- Oil drain plug
‹› 30 Nm (22 ft lb)
20- Seal
‹› Always replace
21- Oil pan
‹› Clean mating surface before assembly
22- Suction line
‹› Clean screen if dirty
23- Baffle
‹› To remove, remove oil pump cover or suction line
24- Gasket
‹› Always replace Gasket with baffle plate (where applicable):
‹› Replace if damaged
‹› To remove, remove oil pump cover