Cabrio GL L4-2.0L (ABA) (2001)
- Disengage spring clip -arrow- and remove sealing cap.
- Disconnect harness connector -1- at bulb.
- Disengage spring clip -2- by pushing on locking lugs -3-.
- Pull bulb -4- out of reflector. Do not touch bulb during
installation.
- Insert new bulb so that lugs on laminated plate aligns with grooves
in reflector.
- Attach harness connector -1-.
- Attach sealing cap and reconnect electrical connector.
- Always check headlight setting after installing new bulb.