Cabrio GL L4-2.0L (ABA) (2001)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
airbag Modules, Replacing Following An Accident
Accident involving airbag deployment
Following components must always be replaced:
-
Drivers side airbag module
-
If necessary (visual check) also replace following: all damaged components
-
Front passengers side airbag module
-
Control module with bracket
-
Airbag Spiral Spring/Return Spring With Slip Ring F138
-
Driver seat belt
-
Front passenger seat belt (if activated)
-
In addition, following must also be replaced if necessary (visual check): All damaged components
After replacing airbag modules or the control module, attach label (only tear-off strip) to registration card and send registration card to appropriate
business center or to the importer.
Registration card must be ordered separately.
Accident not involving activation of airbag
-
If Airbag Malfunction Indicator Lamp (MIL) K75 does not indicate a malfunction, it is not necessary to replace airbag components. Seat belts
should be checked separately.